(window.webpackJsonp=window.webpackJsonp||[]).push([[534],{853:function(t,a,v){"use strict";v.r(a);var _=v(10),r=Object(_.a)({},(function(){var t=this,a=t._self._c;return a("ContentSlotsDistributor",{attrs:{"slot-key":t.$parent.slotKey}},[a("h1",{attrs:{id:"供电与连接上位机"}},[a("a",{staticClass:"header-anchor",attrs:{href:"#供电与连接上位机"}},[t._v("#")]),t._v(" 供电与连接上位机")]),t._v(" "),a("p",[t._v("典型 "),a("strong",[t._v("NMEA 0183 / NMEA 2000")]),t._v(" 场景通常即插即用；需要改参时使用 "),a("RouterLink",{attrs:{to:"/developers/fdigroundstation/"}},[t._v("FDIGroundStation")]),t._v(" 或以太网版 Web 界面。")],1),t._v(" "),a("h2",{attrs:{id:"供电"}},[a("a",{staticClass:"header-anchor",attrs:{href:"#供电"}},[t._v("#")]),t._v(" 供电")]),t._v(" "),a("table",[a("thead",[a("tr",[a("th",{staticStyle:{"text-align":"left"}},[t._v("版本")]),t._v(" "),a("th",{staticStyle:{"text-align":"left"}},[t._v("输入")])])]),t._v(" "),a("tbody",[a("tr",[a("td",{staticStyle:{"text-align":"left"}},[t._v("串行 / CAN")]),t._v(" "),a("td",{staticStyle:{"text-align":"left"}},[a("strong",[t._v("6–28 V")]),t._v("（建议 ≥ 2 A；串行分线电缆直流口，建议串接约 5 A 保险丝）")])]),t._v(" "),a("tr",[a("td",{staticStyle:{"text-align":"left"}},[t._v("以太网")]),t._v(" "),a("td",{staticStyle:{"text-align":"left"}},[a("strong",[t._v("PoE 6–28 V")]),t._v("（802.3af / 802.3at），或合规独立供电")])])])]),t._v(" "),a("p",[t._v("详见 "),a("RouterLink",{attrs:{to:"/psi/03-规格/03.html"}},[t._v("电气规格")]),t._v("。")],1),t._v(" "),a("p",[t._v("配套电缆连接器带锁定螺母与 O 形圈，推到位后顺时针旋紧可达 "),a("strong",[t._v("IP67")]),t._v("。")]),t._v(" "),a("h2",{attrs:{id:"连接选项"}},[a("a",{staticClass:"header-anchor",attrs:{href:"#连接选项"}},[t._v("#")]),t._v(" 连接选项")]),t._v(" "),a("h3",{attrs:{id:"nmea-2000"}},[a("a",{staticClass:"header-anchor",attrs:{href:"#nmea-2000"}},[t._v("#")]),t._v(" NMEA 2000")]),t._v(" "),a("p",[t._v("使用 "),a("strong",[t._v("NMEA 2000 电缆")]),t._v("（部件号参考 GC-NMEA 2000-CABLE）：一端接 PSI，另一端经 T 件接入船内 NMEA 2000 主干网。详见 "),a("RouterLink",{attrs:{to:"/psi/03-规格/05.html#nmea-2000-电缆"}},[t._v("NMEA 2000")]),t._v("。")],1),t._v(" "),a("h3",{attrs:{id:"nmea-0183-串行"}},[a("a",{staticClass:"header-anchor",attrs:{href:"#nmea-0183-串行"}},[t._v("#")]),t._v(" NMEA 0183 / 串行")]),t._v(" "),a("p",[t._v("使用 "),a("strong",[t._v("串行分线电缆")]),t._v("（部件号参考 GC-SER-BREAK-20M）：辅助串口接接收设备；直流口按上文供电。详见 "),a("RouterLink",{attrs:{to:"/psi/03-规格/05.html#串行连接"}},[t._v("串行连接")]),t._v("。")],1),t._v(" "),a("h3",{attrs:{id:"以太网-poe"}},[a("a",{staticClass:"header-anchor",attrs:{href:"#以太网-poe"}},[t._v("#")]),t._v(" 以太网 / PoE")]),t._v(" "),a("p",[t._v("使用 "),a("strong",[t._v("以太网电缆")]),t._v("（部件号参考 GC-POE-CABLE-20M）：一端接 PSI，另一端接 PoE 注入器（如 POE-INJECTOR-DC）或兼容 PoE 交换机，再接入路由器。详见 "),a("RouterLink",{attrs:{to:"/psi/03-规格/05.html#以太网连接"}},[t._v("以太网连接")]),t._v("；发现与 IP 见 "),a("RouterLink",{attrs:{to:"/psi/04-安装/网络配置.html"}},[t._v("网络配置")]),t._v("。")],1),t._v(" "),a("h3",{attrs:{id:"fdilink"}},[a("a",{staticClass:"header-anchor",attrs:{href:"#fdilink"}},[t._v("#")]),t._v(" FDILink")]),t._v(" "),a("p",[t._v("同样可使用串行分线电缆：主串口接 FDILink 接收端；直流口供电要求与串行方案相同。协议见 "),a("RouterLink",{attrs:{to:"/developers/02-fdilink/"}},[t._v("FDILink")]),t._v("。")],1),t._v(" "),a("h2",{attrs:{id:"连接上位机"}},[a("a",{staticClass:"header-anchor",attrs:{href:"#连接上位机"}},[t._v("#")]),t._v(" 连接上位机")]),t._v(" "),a("h3",{attrs:{id:"串行版本"}},[a("a",{staticClass:"header-anchor",attrs:{href:"#串行版本"}},[t._v("#")]),t._v(" 串行版本")]),t._v(" "),a("ol",[a("li",[t._v("用 USB 转串口适配器连接分线电缆的"),a("strong",[t._v("主串口")]),t._v("，并确认驱动已安装（见 "),a("RouterLink",{attrs:{to:"/developers/getting-started/#常用接口驱动"}},[t._v("常用接口驱动")]),t._v("）")],1),t._v(" "),a("li",[t._v("打开 FDIGroundStation，选择端口，波特率设为 "),a("strong",[t._v("921600")]),t._v("，点击 "),a("strong",[t._v("Connect")])]),t._v(" "),a("li",[t._v("在配置菜单按需修改参数；配置一般掉电保存，通常只需设置一次\n"),a("fdi-img",{attrs:{width:"70%",alt:"连接上位机",src:"/fdigroundstation/连接上位机.png",caption:"FDIGroundStation 连接上位机"}})],1)]),t._v(" "),a("h3",{attrs:{id:"以太网版本"}},[a("a",{staticClass:"header-anchor",attrs:{href:"#以太网版本"}},[t._v("#")]),t._v(" 以太网版本")]),t._v(" "),a("ol",[a("li",[t._v("将以太网电缆接入 PoE「数据+电源」侧，数据侧接入支持 DHCP 的路由器")]),t._v(" "),a("li",[t._v("浏览器访问设备 Web 界面（见 "),a("RouterLink",{attrs:{to:"/psi/04-安装/网络配置.html"}},[t._v("网络配置")]),t._v("），或通过主串口使用 FDIGroundStation")],1),t._v(" "),a("li",[t._v("按需修改配置并保存")])]),t._v(" "),a("p",[t._v("连接成功后，继续 "),a("RouterLink",{attrs:{to:"/psi/05-使用/载体配置.html"}},[t._v("载体配置")]),t._v(" → "),a("RouterLink",{attrs:{to:"/psi/05-使用/RTK配置.html"}},[t._v("RTK 配置")]),t._v(" → "),a("RouterLink",{attrs:{to:"/psi/05-使用/初始化.html"}},[t._v("初始化")]),t._v("。")],1)])}),[],!1,null,null,null);a.default=r.exports}}]);